Author Topic: About to tackle a clutch disc install...  (Read 233 times)

locopny

  • Sr. Member
  • ***
  • Posts: 83
About to tackle a clutch disc install...
« on: March 19, 2017, 01:48:22 AM »
Is there anything 'special' I should be aware of?  I've never done one on any motorcycle I've owned...so I'm in virgin territory.
87 Honda XL600R....also have a new clutch cable to install.

I do have a manual, just looking for advice....(maybe not the advice that says take it to the shop and let them do it).

Thanks.    Getting warmer and I'm more motivated now that I got my truck together.
87 XL600R (#3)
89 CBR600R

greatbuffalo

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2093
Re: About to tackle a clutch disc install...
« Reply #1 on: March 19, 2017, 08:35:22 AM »
I have no wisdom to impart but I will wish you good luck.
Did I ever tell you: " I HATE MUD!" ?

Fletch

  • Hero Member
  • *****
  • Posts: 1165
Re: About to tackle a clutch disc install...
« Reply #2 on: March 19, 2017, 10:50:17 AM »
Soak the plates in oil before installing them.  Other than that, pretty simple. 
stupid is my middle name, but my first name is Mike

Hank

  • Administrator
  • Hero Member
  • *****
  • Posts: 2308
Re: About to tackle a clutch disc install...
« Reply #3 on: March 19, 2017, 12:09:36 PM »
Yes its very straight forward...dig in!

Sent from my Commodore Pet


tannerc

  • Veteran Member
  • ****
  • Posts: 635
Re: About to tackle a clutch disc install...
« Reply #4 on: March 19, 2017, 09:10:03 PM »
Check basket for wear while you are there.




 :o
"Retreat, hell! We're not retreating, we're just advancing in a different direction."

locopny

  • Sr. Member
  • ***
  • Posts: 83
Re: About to tackle a clutch disc install...
« Reply #5 on: June 17, 2017, 10:01:16 PM »
Back is feeling better enough to finish putting the bike together.  Now that the rally is basically over.  Have you met my nemesis...Murphy?  Everything seems to go according to his rules.
87 XL600R (#3)
89 CBR600R